![]() ![]() Ground the machine to a ground resistance of less than 4 ohms.ĭue to the many different screen errors that can appear during the laboratory laser process or setup procedures, we will only explain a few common errors for your quick reference and corrective action: If you have no guides, feel free to send us a request and we will provide you with one shortly. Please read the manual carefully before using the machine, and then handle the machine correctly.īe sure to keep the Service Manual close to the machine so that you can refer to it straight away if you have any operational questions or problems. If you do this, moisture in the air can condense on the machine, causing the laser guns to fog up, malfunctioning electronics and circuit boards, etc. – Do not raise or lower the room temperature suddenly. – Do not install the machine in a very dusty or highly vibrating place. Otherwise, use an air conditioning system. – The machines should be used in places with a relative humidity of 30 to 75% and an ambient temperature of 18 to 30 ° C. ![]() To avoid basic causes of screen errors, always follow the installation requirements: ![]()
0 Comments
Leave a Reply.AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |